» Welcome to English «

Crabby Guy
offline


OC Newbie
22 Jahre dabei !

AMD T-Bred


I think I understand that connecting pins is just like connecting bridges.  However, how do I disconnect pins (insteading of cutting bridges)?

Also, can I change Vcore this way?

Beiträge gesamt: 5 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2003 | Dabei seit: 8062 Tagen | Erstellt: 9:40 am 8. Juni 2003
NWD
aus Gronau (Leine)
offline



Real OC or Post God !
24 Jahre dabei !

AMD Ryzen 7
3800 MHz @ 4600 MHz
60°C mit 1.325 Volt


yep..

the bridge has a mor or less direct connection to a pin

disconnecting a pin is very difficult..

i have seen a very dangerous method, you can open your Socket and remove the "pins" in the socket..

but this is an permanent method and you can easily damage your mainboard ..

i would  Disconnect per Bridges and Connect via Pins

for cutting just take a very sharp knife or an scalpell


Work like you don´t need the money    Love like you´ve never been hurt         Dance like nobody´s watching             Sing like nobody´s listening
But Live as if you will die today

Beiträge gesamt: 17781 | Durchschnitt: 2 Postings pro Tag
Registrierung: Mai 2001 | Dabei seit: 8816 Tagen | Erstellt: 22:02 am 8. Juni 2003
ocinside
aus Krefeld
offline



Administrator
24 Jahre dabei !

Intel Core i9
3200 MHz @ 6184 MHz
115°C mit 1.508 Volt


For the Pin-Mod guide it's not necessary to disconnect any pin when you set your the multiplier control in your BIOS to AUTODETECT.
If you don't have something like this in your BIOS, there's no need to do so ;)

The state of LOW or HIGH is done when you connect the Pin to VSS or VCC, this is what my interactive Pin-Mod guide do, so there's no need to cut anything :thumb:

Oh and Vcore Mod ... hmmm don't like to say too much, yet ;););)


Hardware News lesen * Talk * Smarthome, Gadgets, Solar * Testberichte
@OCinside * @Funkyhome * @LavaDeluxe

Beiträge gesamt: 172081 | Durchschnitt: 19 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8830 Tagen | Erstellt: 19:34 am 10. Juni 2003