AMD Thorton 1666 MHz @ 2350 MHz 40°C mit 1.85 Volt
ou sorry, my english is not the best
it is possible to cool a cpu of about -50°c...
it´s easy, you take a kompressor from a "kühlschrank" = the thing what stay in a kitchen too cool food *g* und put the cooling chanels into the water. water is not good, so you should take spiritus or wodka *g*
und put a eye an the isolierung. without the "isolierung" the kondenswater comes into your case and destroy all your PC komponents...
sorry i know that my english is not the best
Beiträge gesamt: 2539 | Durchschnitt: 0 Postings pro Tag Registrierung: Juni 2003 | Dabei seit: 5288 Tagen | Erstellt: 21:20 am 21. Feb. 2004
You can make -2° Celsius with a Peltier-Element. It is a small thing with a strenght of 12-24V and 6-10A.
One side will be very hot, and the other side will be cool. The problem at this solutions is: They produce a lot of energy in form of heat at the hot side. Maybe you can cool this side with a watercooler. Then you are able to go to 2° till -2°. But remember. You have to isolate the peltier because it will produce condensation water.
Maybe you can reduce the power of the peltier with a mod at your power supply. So you can have 10° and no condensation. This temp will be stable and be enough to overclock.
Under this temp is only the vapo, but very expensive.
The other way is a watercooler which runs at 25-40° if it is good. But there are two ways of them, the self-built and the buyed one.
Kaufempfehlung CPU-RAM-MB,Netzteile,Festplatten Hausbau Topic - Alle Ideen sehr erwünscht!
Beiträge gesamt: 12566 | Durchschnitt: 2 Postings pro Tag Registrierung: März 2003 | Dabei seit: 5401 Tagen | Erstellt: 22:31 am 6. April 2004