i have a duron 950 and i want to overlclock it to a 1200 but im sure it would go higher but i tried the pencil trick and cut some bridges with a nife and a needle and some other licky thing well im not sure the cut threw but in dos when i reboot it still rights 950? what can i do?
i have a ecs k7s5a mainboard with a duron950 and i cant change the cpu ratio on it so i decided to apply the pencil trick to overclock it to a 1150 (sure i could go higher) but when i booted up it still was written duron 950 so i reapplied and no luck what can i be doing wrong or what am i know doing? DrEw
Beiträge gesamt: 2 | Durchschnitt: 0 Postings pro Tag Registrierung: April 2002 | Dabei seit: 5713 Tagen | Erstellt: 4:08 am 23. April 2002
Intel Core i5 3800 MHz @ 5098 MHz 60°C mit 1.44 Volt
Hiya, first of all "Beschreibung des Themas" means that it's possible to write in a more detailed description (if necessary)
But if nothing happens after you've cut and painted the bridges, there have to be a failure. Please try to connect the L7 bridges with your pencil to check if your pencil give the necessary resistor to "become a bridge connection" After this you should get 1.85 Vcore in your PC-Health Menü.
If this works you can be sure the pencil is OK
That means that you didn't cut the bridges 100 % !
Oh and btw you have to use the "older" painting guide if you didn't have a 5 bit (5 bridges) Duron !
Hardware News lesen * preiswert einkaufen * Unterhalten Übertakten, Modding und Testberichte * Fanartikel und Bausätze kaufen
Beiträge gesamt: 152788 | Durchschnitt: 25 Postings pro Tag Registrierung: April 2001 | Dabei seit: 6070 Tagen | Erstellt: 13:37 am 23. April 2002