» Welcome to English «

Muk
offline


OC Newbie
20 Jahre dabei !


First of all, thank you for a great website.  I am trying to up the voltage on my 2500+.  I am trying to cut the L11 bridges.  One is already laser cut.  The rest I am cutting with an exacto knife.  I've cut fairly deep... but there has been no effect.  Can anyone who has cut them give me some help?  does the cut have to be precise between the golden circles, or can it be a line through all of the bridges?  The guide said .5-1mm thick, I think Ive done that...

Beiträge gesamt: 1 | Durchschnitt: 0 Postings pro Tag
Registrierung: Aug. 2003 | Dabei seit: 7527 Tagen | Erstellt: 4:28 am 10. Aug. 2003
Beomaster
aus Dresden
offline



Real OC or Post God !
22 Jahre dabei !

AMD Phenom II
3200 MHz @ 3675 MHz
59°C mit 1.400 Volt


its not easy to cut the bridges, whatever you wanted to do, better try the interactive pin mod, this is more easy and does it even too.


[SiLa] BF2 BattleClan
Orgelgott

Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8061 Tagen | Erstellt: 18:28 am 17. Aug. 2003
OC4life
offline



Enhanced OC
21 Jahre dabei !

AMD T-Bred
1466 MHz @ 2274 MHz
46°C mit 2.00 Volt


Yes the pin mod is better, but not easier.
You need a "not shaking:lol:" hand to do this...
I needed for connect 2 pins 1h...lol


Wer mit seinem NFORCE-2-Ultra nicht über 220-225FSB bekommt hier gucken----> https://www.forum-inside.de/topic.cgi?forum=1&topic=6914
NF7-S Rev.2 Athlon XP 1700+ DUT3C 0302XPMW auf 227x10; 2x256MB TwinMOS/Winbond CH-5@454DDR@2.9V@11-2-2-2
MSI Geforce4 Ti4200 TD64 und hier meine Kiste http://www.nethands.de/pys/show.php4?user=oc4life

Beiträge gesamt: 306 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2003 | Dabei seit: 7709 Tagen | Erstellt: 17:27 am 23. Aug. 2003
Beomaster
aus Dresden
offline



Real OC or Post God !
22 Jahre dabei !

AMD Phenom II
3200 MHz @ 3675 MHz
59°C mit 1.400 Volt


OK, but if you have silent hands, you switch the pc off, open the tower, get the cpu cooler, take off the cpu, connect the pins you want and do the first steps in reverse order. it take me 10 minutes to give my 1700+ a new multi and voltage


[SiLa] BF2 BattleClan
Orgelgott

Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8061 Tagen | Erstellt: 22:57 am 25. Aug. 2003
Lazerblade
offline


OC Newbie
20 Jahre dabei !

AMD Duron Morgan
1200 MHz @ 1260 MHz
46°C mit 1.78 Volt


in the Tbred B pin mod guide, it says i must "cut the L11 bridges, or you'll just be able to build a higher vcore"

this is confusing. i want to RAISE the Vcore of a cpu from 1.5v to 1.725v. can i just connect the pins on the CPU SOCKET as the pin mod guide says, or do i also have to cut the L11 bridges?

Beiträge gesamt: 1 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7447 Tagen | Erstellt: 1:26 am 29. Okt. 2003
dergeert
aus owerglöcktensid
offline



OC God
20 Jahre dabei !

AMD Athlon 64 X2 Dual Core
1900 MHz @ 2280 MHz
45°C mit 1.125 Volt


go to the pinmod-guide.
see, how 1,5v would look like (2 bridges)
you already have those wired on your cpu, haven't you?
check out 1,6v or 1,7v. you'll see that this is one additional wire to 1,5v wiring. you only need to add this one wire into your socket ;)
as simple as that, only digital logic after all :lol:

Beiträge gesamt: 4710 | Durchschnitt: 1 Postings pro Tag
Registrierung: Sep. 2003 | Dabei seit: 7481 Tagen | Erstellt: 10:23 am 1. Nov. 2003