» Welcome to English «

commander
offline


OC Newbie
22 Jahre dabei !

AMD Athlon XP


I have an Abit KT7 motherboard that will overclock to about 105Mhz FSB only.

I have an Athlon XP 1600+ which is unlocked i.e. L1s closed, but I am only running it at 1250 MHz because my multipliers only go upto to x12.5.

I would like to have higher multilpliers eg. x14 to x16.

Would someone please explain (in English please ) what mods I need to make to my Athlon XP.

I am guessing this is what needs to be done ?

1) Close all L1 bridges (Done)
2) L3 Bridges - Leave alone ?????
3) L4 Bridges - Leave alone ?????
4) L10 Bridges - Cut first bridge, Close second bridge.

Are there any more mods to be done.

What do I set in the motherboard to get x14 to x16

Please help!


Beiträge gesamt: 3 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8067 Tagen | Erstellt: 14:11 am 25. Feb. 2002
ocinside
aus Krefeld
online



Administrator
22 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt


Hmmm, why don't you look at my interactive XP painting guide in the workshop ?
If you just change the L10 bridge you'll get an multi of 18,5 :danger:

I think this would be too much for your poor 1600+ at the first try ;)

Nope, better choose a multi like 15x this should work at your 100 MHz :eek: :( mainboard.
Then you'll get 1500 MHz with an option for 1575 MHz at 105 MHz FSB.


Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 169566 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8368 Tagen | Erstellt: 20:29 am 25. Feb. 2002
commander
offline


OC Newbie
22 Jahre dabei !

AMD Athlon XP


Thanks Ocinside,

I have been using your XP painting guide - very useful.

I just wanted some one to confirm that .......

1) I did not have to do anything with the L3,L4 bridges when the L1 bridges are closed and the only change required was to the L10 bridges.

2) When done presumably setting the motherboard to a multiplier effectively has x8 added on i.e x12 becomes x12 ?

Are 1 and 2 correct?

Beiträge gesamt: 3 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8067 Tagen | Erstellt: 21:59 am 25. Feb. 2002
commander
offline


OC Newbie
22 Jahre dabei !

AMD Athlon XP


sorry meant x12 become x20 !

Beiträge gesamt: 3 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8067 Tagen | Erstellt: 22:07 am 25. Feb. 2002
ocinside
aus Krefeld
online



Administrator
22 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt


Oh sorry, i misunderstood you.
I didn't try just changing the L10 bridge and then increase the mutli via BIOS, but i don't think that this could work.

Normally you have to cut and paint the L3, L4 and L10 bridges, but you'll already know this ;)
Please try your idea and post the results - you can't frie anything if you just change the L10 bridge ;)
But don't leave the BIOS multiplier settings at default !
Because you would get a very high mutli :lol:


Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 169566 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8368 Tagen | Erstellt: 11:52 am 26. Feb. 2002
ZildjianMM
aus USA
offline



Member
22 Jahre dabei !

AMD Thunderbird B
1100 MHz @ 1262 MHz
43°C mit 1.75 Volt



Zitat von commander am 9:11 am Feb. 25, 2002
I have an Abit KT7 motherboard that will overclock to about 105Mhz FSB only.

I have an Athlon XP 1600+ which is unlocked i.e. L1s closed, but I am only running it at 1250 MHz because my multipliers only go upto to x12.5.

I would like to have higher multilpliers eg. x14 to x16.

Would someone please explain (in English please ) what mods I need to make to my Athlon XP.

I am guessing this is what needs to be done ?

1) Close all L1 bridges (Done)
2) L3 Bridges - Leave alone ?????
3) L4 Bridges - Leave alone ?????
4) L10 Bridges - Cut first bridge, Close second bridge.

Are there any more mods to be done.

What do I set in the motherboard to get x14 to x16

Please help!





I also have this board. Although I have the first revision. Are you using a Maxtor harddrive? I have the same exact problem. I can push the FSB up to 105 and right now (by just unlocking L1) i was able to get a 12x multiplier. Does anyone know of a solution to the FSB issue???

Beiträge gesamt: 2 | Durchschnitt: 0 Postings pro Tag
Registrierung: März 2002 | Dabei seit: 8055 Tagen | Erstellt: 4:52 am 13. März 2002
ocinside
aus Krefeld
online



Administrator
22 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt


There's no really good solution for the FSB problem,
because the first KT133 (without A) Revision doesn't support higher FSB rates :(

But of course, you're able to use my interactive painting guide to increase the multi :thumb:

And if you just need a little more FSB speed try it with a higher VIO and better Northbridge cooling.


Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 169566 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8368 Tagen | Erstellt: 7:47 am 13. März 2002
Jensd
offline



OC Newbie
21 Jahre dabei !


Hallo, ich habe folgendes Problem: Seit kurzem habe ich ein Abit KT7-RAID Board V1.2(kein 1.3) und einen Athlon  XP 1700. Nahc dem Einbau des Prozessors und einem BIOS-update wurde der Prozessor mehr oder weniger erkannt, dh. er läuft mit 1100MHz. Ich habe im BIOS verucht die Multiplikatoren zu ändern jedoch fährt der Rechner dann nicht mehr hoch. Kann mir jemand helfen den Prozessor ans Laufen zu bekommen ?

Beiträge gesamt: 1 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2002 | Dabei seit: 7822 Tagen | Erstellt: 9:20 am 29. Okt. 2002
darkcrawler
aus cottbus
offline



Real OC or Post God !
22 Jahre dabei !

Intel Pentium Dual Core
1600 MHz @ 3206 MHz mit 1.316 Volt


man jense das is das englisch topic, so speak in english plz;)

your xp is running with 11X100=1100 instead of 11X13=1466=xp1700, but the kt7 chipset doesn't allow 2 rum the fsb higher than 107~111 mhz, so you've got to higher the multiplicator with the "interaktive malanleitung" ;)

Beiträge gesamt: 12262 | Durchschnitt: 1 Postings pro Tag
Registrierung: Mai 2001 | Dabei seit: 8353 Tagen | Erstellt: 8:38 am 30. Okt. 2002