Gigabyte GA-7VT600(-L) - OCinside.de PC Forum

Gigabyte GA-7VT600(-L)

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Gigabyte GA-7VT600(-L)
https://www.forum-inside.de/topic.cgi?forum=14&topic=134

Ein Ausdruck des Beitrags mit 5 Antworten ergibt bei 3 Antworten pro Seite ca. 2 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 9.98 Gramm Papier.

-- Veröffentlicht durch svetlibp am 0:02 am 30. Jan. 2005

Zitat von IVI am 20:38 am Jan. 13, 2005

-> who says that? AIDA? Everest? the MSI-Tool?

the BIOS says that

-- Veröffentlicht durch fossi am 18:19 am 23. Jan. 2005

I have the same board. Well now it`s dead.

I had to set the standart FSB to 200 per Pinmod --> Workshop.
Otherwise my Gigabyte doesn`t work.

Tip: After overclocking load "Top Performance" in the Bios. I got 400mb/sek in reading more.

Good Luck!

-- Veröffentlicht durch IVI am 20:38 am 13. Jan. 2005

I have heared that there is no PCI/AGP lock.
-> right

I want to overclock the CPU Barton 2500+ to 3200+ (x11.0) by FSB. (from 166 to 200) But when I do it the PCI/AGP from 33/66 goes 40/80. Is there a way to fix PCI/AGP 33/66?
-> who says that? AIDA? Everest? the MSI-Tool? don't worry, these programs "calculate" the PCI/AGP based on the standard one ... programs like those can't "read" it ... in fact the board switches to 33/66 @ FSB 200

-- Veröffentlicht durch NWD am 11:40 am 8. Jan. 2005

If the board officially supports FSB 200Mhz it is no problem.. Is it an Via KT600 - Chip?

-- Veröffentlicht durch svetlibp am 1:06 am 6. Jan. 2005

Gigabyte GA-7VT600(-L)
I have heared that there is no PCI/AGP lock. I want to overclock the CPU Barton 2500+ to 3200+ (x11.0) by FSB. (from 166 to 200) But when I do it the PCI/AGP from 33/66 goes 40/80. Is there a way to fix PCI/AGP 33/66?