p2

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- p2
https://www.forum-inside.de/topic.cgi?forum=14&topic=133

-- Veröffentlicht durch poekie am 20:58 am 9. Jan. 2005

Thats treu, the board is able to change some usefull settings, only the p2 processor is locked. I found on oc inside an article about the p2, about putting a circuit between RESET#, IGNNE#, A20M#, LINT0 and LINT1 ...
Now, i aint a newbe in overclocking, but this seems quite hard. What i need is some pictures, some explenation, a guide or something.
Its worth trying to oc the p2, much more intresting then all those athlons, thats easy..:noidea:

-- Veröffentlicht durch NWD am 11:38 am 8. Jan. 2005

No jumpers for setting the FSB? I bet there is because the board supports P3s with a 100mhz FSB.

-- Veröffentlicht durch poekie am 20:40 am 6. Jan. 2005

only way to upper the fbs is to change it in the bios. But my bios isnt capable of changing it, it doesnt have the function :(

-- Veröffentlicht durch Philipp Stottmeister am 20:35 am 6. Jan. 2005

Some Pentium2 are locked. Thats why you cant change the multiplicator.
The only way to overclock the precessor is to set the FSB up. I think the Pentium 2 is running on 66MHz FSB. YOu can sat it e.g. to 75MHz. :thumb:

-- Veröffentlicht durch poekie am 22:11 am 5. Jan. 2005

My baby:

A good old  intel pentium 2 with a slot 1 proc.
My mobo a siemens D 1115 with some jumpers to select processors up to a pentium3.
My problem is that i cant get this processor overclocked. I cant select multipliers in the bios, neither pinmod the poor proc. I cant change the multiplier in small steps using CpuFbs, cause it doesnt recognise my  pll, and i dont know if i can voltmod this baby..or how.
Any1 got a suggestion how to put out some extra of this pentium 2?

Greats  poekie