» Willkommen auf Grafikkarten OC «

MrPerfect
aus Süd-NRW
offline



OC Newbie
20 Jahre dabei !

AMD Athlon XP
1533 MHz


hier das statement von guru3d, dem ich nur zustimmen kann:

I think it's time to send out the warning, or at least make 9800 owners aware of a potential issue with the new 3.8 drivers. I've been monitoring this issue on the web ever since gossip on this issue started yet was not sure it was isolated to particular users, actually I'm still not convinced. Yet a lot of sites have picked up on this on their forums and it would be just flat out wrong not to report this.

It seems that a number of 9800 (Pro) users are reporting that the new Catalyst 3.8 drivers can overheat your Radeon 9800.

Cards Affected:
All Radeon 9800 XT's
All Radeon 9800 Pro's
All Radeon 9800 Non-Pro's
All Radeon 9700 Pro's soft-modded to 9800 series.
All Radeon 9700 Non-Pro's soft-modded to 9800 series.
All Radeon 9500's soft modded to 9800 series.

Note: Radeon 9600, 9200, 9100, 9000, 8500 or previous generations are NOT affected by this serious issue.

Software Causing Hardware Failure:
ATI's Catalyst 3.8 Driver Series
OMEGA Catalyst 3.8 Driver Series

Here's a snip from SimGuy over at shortMedia:

While we're not quite sure what part of the Catalyst 3.8 drivers are causing this, some part of the driver (whether it's the new VPU Recovery feature, HyperZ Enhancements or the ATI Overclocking software) is causing the core on BBA and OEM Radeon cards that are identified as "RADEON 9800 XT", "RADEON 9800 PRO" and "RADEON 9800" in Windows to have their GPU's overheat by as much as 15*C over normal during 3D graphics sessions. This has caused a number of fans on the Radeon 9800 XT series to fail, allowing the heat to completely destroy the card.

This news is especially important for individuals who performed the 9800 to 9800 Pro BIOS flash and did not include additional cooling on your card, as the GPU is already overclocked and producing more heat than normal.

As a safety precaution, I am strongly encouraging that anyone with any of the affected cards above roll their drivers back to the Omega Catalyst 3.7 drivers or the ATI Catalyst 3.7 drivers, as they are verified not to cause this overheating issue.

I did some testing with my Radeon 9800 NP BIOS-flashed to a 9800 Pro. The results are not encouraging.

Running looping 3DMark2003 for 30 minutes and utilizing a temperature probe on my GPU (regular cooling), the following temperatures were recorded:

Catalyst 3.8: 135 Fahrenheit
Catalyst 3.7: 117 Fahrenheit
The heatsink on my Sapphire Atlantis 9800 was so hot during the Catalyst 3.8 test that I burnt my hand when I accidently touched it.

2) The Catalyst 3.8's seem to have a bug in some systems that allows the driver to process the SECONDARY adapter settings when a game is started and tries to switch to the resolution and refresh rate specified in the program.

Normally, the card is limited by the INF file settings for the PRIMARY adapter, so that no resolution or refresh rate is attempted that is beyond the capability of the monitor hardware. But in the 3.8's, it seems to be processing the SECONDARY adapter settings first. In a system without a monitor plugged into the second adapter, there is no INF file limiting refresh rates and resolutions, so, the system is trying to force refresh rates and resolutions beyond what the monitor on the PRIMARY adapter is capable of.

So instead of having the monitor "flicker" once when it switches to the desired resolution/refresh, monitors are "flickering" between 4 and 8 times, with resolutions and refresh rates that are beyond the capability of the actual monitor. As a result, some monitors have been damaged, while others have blinked out and recovered. Some users monitors are under warranty and can be RMA'd, but for those who don't have a monitor under warranty, their monitor is damaged and they must buy a new one.

I recommend as a safety precaution, that anyone with any of the affected cards above roll their drivers back to the ATI Catalyst 3.7 drivers, as they are verified not to cause this monitor refresh-related problem.

Catalyst 3.7 Download Locations:

Windows 2000/XP
Catalyst 3.7 :: Control Panel

Windows 98/Me
Catalyst 3.7 :: Control Panel

This is what ATI states on this situation:

1) Overheating: We have spent a great deal of time analyzing the temperatures due to the CATALYST 3.8 drivers. We do not under any circumstance see anything near a 10 degree Celsius increase in temperature (but we don?t overclock our test cards either). We do see a slight increase in temperature in certain cases (3Dmark2003 Nature Scene for example). However any temperature increase is well within our safety range. Investigation continues and we are trying to determine why this change in temperature exits

2) Monitors: We have spent a great deal of time trying to reproduce this problem and analyzing the driver code. There is nothing to be found. At this point we are working very closely with an ATI Beta Tester who experienced a monitor loss. There have been zero reports in our customer support of monitors dying.

If you don't have a temperature probe then a good way to monitor this is checking the CPU and ambient temperature inside the case. If you know what they are normally then you bet ya that they will rise as the inside of the case will be heated up also. You can also check it (very subjective) by feeling the heatsink of the GPU during a good 3D gaming run. Watch out though, the thing can get rather hot.

We have a discussion thread open on this topic over here, check it for more information and to share your insight on this topic.

-----------------------------------------
wer sich nen gefallen tun will, der nimmt den 3.7er :thumb:


"Wir sollten erkennen, dass die Vereingten Staaten in weiten Teilen der Welt als der führende terroristische Staat angesehen werden. Und das aus gutem Grund." (Noam Chomsky - "9-11")

Beiträge gesamt: 46 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7471 Tagen | Erstellt: 16:58 am 19. Okt. 2003
Maze
aus Potsdam City
offline



Enhanced OC
20 Jahre dabei !

AMD Barton
2000 MHz @ 2500 MHz
45°C mit 1.775 Volt


kannste ma in kurzen Worten beschreiben was da steht:

Kann zwar perfekt English und Französisch - war 1-1/2 in England.

Hab aber kein Bock zu lesen danke !!!


Eierkuchen - find ich gut...
www.maze84.de     Nethands

Beiträge gesamt: 430 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7476 Tagen | Erstellt: 21:50 am 19. Okt. 2003
Breaker10
aus Weilmünster
offline



OC God
22 Jahre dabei !

Intel Core 2 Quad
2933 MHz @ 3800 MHz
46°C mit 1.2 Volt


Angeblich soll der catalyst 3.8 den Moni zerstören wegen der refresh

rate beim Win start, bei mir läuft alles noch super :biglol:


WIE POSTE ICH FALSCH ?
Nachdem ich GOOGLE, die FAQ´s und die BOARDSUCHE erfolgreich ignoriert habe, erstelle ich zwei bis fünf neue Themen, in den falschen Unterforen, mit kreativen Titel und undeutlichem Text, unter dem sich jeder etwas anderes vorstellen kann

Beiträge gesamt: 7089 | Durchschnitt: 1 Postings pro Tag
Registrierung: Mai 2001 | Dabei seit: 8354 Tagen | Erstellt: 21:57 am 19. Okt. 2003
Psylo
offline


OC Newbie
20 Jahre dabei !

AMD T-Bred
1800 MHz


Könnte es vielleicht damit zusammenhängen, dass mein Moni immer ausgeht wenn ich eine gepatchte ati2mtag (9800se zu 9800pro)datei lade?

Beiträge gesamt: 2 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7467 Tagen | Erstellt: 22:35 am 19. Okt. 2003
tochan01
aus NRW
offline



OC Profi
20 Jahre dabei !

Intel Core 2 Duo
1866 MHz @ 2800 MHz
58°C mit 1.225 Volt


hm, ich hatte seit kurzem das prob das mein moni beim neustart einfach in einen anderen herz modus gegangen is bzw die grafikkarte. weis jetzt aber nicht genau ob es zeitlich mit der inst. von 3.8 zusammen past. werd ich jetzt mal beobachten.
was auch komsich ist das der schreibt das der chip unter 3.8 wärmer wird als unter 3.7. mein enlgisch is jetzt aber nicht soooo gut das ich das ganz raffe was da steht....


Es gibt Besserwisser, die niemals begreifen, daß man recht haben und doch ein Idiot sein kann.  

Beiträge gesamt: 621 | Durchschnitt: 0 Postings pro Tag
Registrierung: Sep. 2003 | Dabei seit: 7501 Tagen | Erstellt: 0:26 am 20. Okt. 2003
MrPerfect
aus Süd-NRW
offline



OC Newbie
20 Jahre dabei !

AMD Athlon XP
1533 MHz


jop, die graka wird mit dem 3.8er treiber heißer !
das äußerte sich bei mir, indem der monitor beim 3DMark oder bei anderen aufwändigen 3d-anwendungen einfach nach ein paar sekunden schwarz wurde und der pc auf nichts mehr reagierte. seit dem install von 3.7 hab ich so gut wie keine probs mehr damit :thumb:


"Wir sollten erkennen, dass die Vereingten Staaten in weiten Teilen der Welt als der führende terroristische Staat angesehen werden. Und das aus gutem Grund." (Noam Chomsky - "9-11")

Beiträge gesamt: 46 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7471 Tagen | Erstellt: 9:29 am 20. Okt. 2003
nubbi
offline



OC God
20 Jahre dabei !


aber dieses VPU-Recover-feature rult ja wohl ;)
war grad am halo zocken :zocken:, da wird auf einmal der bildschirm schwarz :eek: ich schon "so'n dreck, abgekackt", da kommt auf einmal dieses rettende VPU-Recover-Fenster mit dem Text "Ihre Grafikkarte wurde wiederhergestellt, nachdem sie nichtmehr auf Befehle des GRafiktreibers reagierte". Wow, ich konnte dann zwar nich mehr zocken, aber dafür noch abspeichern und neustarten ;)

nubbi

ps. hab jetzt trotzdem den 3.7er wieder drauf, will ja keine grillparty veranstalten ;)

Beiträge gesamt: 2820 | Durchschnitt: 0 Postings pro Tag
Registrierung: Mai 2003 | Dabei seit: 7635 Tagen | Erstellt: 10:49 am 20. Okt. 2003
konflikt
aus nürnberg
offline


Basic OC
20 Jahre dabei !

AMD Athlon 64
2200 MHz @ 3080 MHz
44°C mit 1.47 Volt


also ich nutz den 3,8er mit ner leicht octen 9800er.

bis jetzt hatte ic h noch keine probleme.

wie sehen die benchmark/spiele ergebnisse aus?

sind die beiden treiber von der performance her gleich oder is der neue schneller auch bei nicht octer graka?`

wäre ma cool das zu wissen.......gibts n tool mit dem ich bei meiner his 9800er die temp auslesen kann?

Beiträge gesamt: 221 | Durchschnitt: 0 Postings pro Tag
Registrierung: Mai 2003 | Dabei seit: 7623 Tagen | Erstellt: 12:30 am 20. Okt. 2003
nubbi
offline



OC God
20 Jahre dabei !


nein, die hat keinen fühler drin

Beiträge gesamt: 2820 | Durchschnitt: 0 Postings pro Tag
Registrierung: Mai 2003 | Dabei seit: 7635 Tagen | Erstellt: 12:33 am 20. Okt. 2003
Metatron1
aus Austria
offline



OC Newbie
21 Jahre dabei !

AMD Athlon XP
1917 MHz @ 2377 MHz
48°C mit 1.82 Volt


Hallo

Also ich hab eine 9700Pro mit CAT 3.8 drauf.

Hin und wieder piepst/pfeift mein Monitor so, als würde er jeden Augenblick die Hz Frequenz Wechsels. Erst ein Neustart behebt das Problem.

Mit allen anderen Treibern treten keine solche Fehler auf!


Ist da was FAUL :noidea:


Gruß
Meta

Beiträge gesamt: 14 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2002 | Dabei seit: 7954 Tagen | Erstellt: 14:08 am 20. Okt. 2003