PinMod: need some extra informations with the socket view -1

» Welcome to English «

New topic Answer

Tsuna
offline

OC Newbie
20 Jahre dabei !

Intel Pentium IV

heya people
I've got a K7D Master with 2 Bartons 2500+ moded in MP (with the L5 bridge)
The bartons are severly underclocked because they're booting at 1800+
They're locked and the BIOS (lastest version) is limited to a multiplier of 12.5x
I'm trying to do the use the pin mod guide to put some wires in the socket so that I can change the multiplier
But once i've got the wires in the right holes, how can I properly insert the bartons in the socket? the wires are already filling the hole! (i've taken some wires, as thin as possible)
are my wires too thick?
?
there's something I don't understand ... I mean
could someone please be kind enough to tell me what exactly has to be done?

Beiträge gesamt: 1 | Durchschnitt: 0 Postings pro Tag
Registrierung: April 2004 | Dabei seit: 7322 Tagen | Erstellt: 20:57 am 8. April 2004

razzzzia
aus Sektion 31
offline

OC God
20 Jahre dabei !

AMD Ryzen 9

well, either u look for some thinner wire or u do the pinmod on the back of ur mainboard (somewhere in the pinmod-howto on this side there is a picture which shows u how to do this) or u connect the appropriate pins on the cpu....
nothin difficult on it at all.
Anyway pay attention that u take the right pins, losing a mainboard an possibly two cpu's would really really suck.

NON EX TRANSVERSO SED DEORSUM

Beiträge gesamt: 8062 | Durchschnitt: 1 Postings pro Tag
Registrierung: Juli 2003 | Dabei seit: 7599 Tagen | Erstellt: 23:05 am 8. April 2004

New topic Answer