I have just bought a tbird 1400 and havnt yet installed it. Anyway, I have a motherboard that DOES NOT allow me to change the multiplier. So I did some searching and found this place, and the guide showing how to change the bridges. BUT that only shows how to get it upto 12.5!
mine will be 14 when i install, so I need to get it higher, maybe to 15.
Anyone know what bridges I would alter to get it to 15 or 15.5?
btw, I have connected the l1 bridges because I did not know this was possible, and there is a program called WPCREDIT that I thought I might be able to use to change the multiplier. Has anyone tried that, because seems like no one has. There is a register that is at 7 (1000) and I was thinking that when I upgrade I might be able to change that to a higher number for my new tbird. (i have a duron 700)
thanx in advance, please help me out if you can.
Beiträge gesamt: 4 | Durchschnitt: 0 Postings pro Tag Registrierung: April 2003 | Dabei seit: 5556 Tagen | Erstellt: 1:09 am 30. April 2003
Intel Pentium Dual Core 1600 MHz @ 3206 MHz mit 1.316 Volt
there's no prog available to change the multiplier. is your mainboard able to run @ 133mhz fsb? (chipset kt133a or newer) if it is lower the multiplier @10.5 and set the fsb to 133 so that you're able to clock higher from there
connecting the l1 is not possible, because they are connected already
(Geändert von darkcrawler um 21:02 am Mai 1, 2003)
Beiträge gesamt: 12262 | Durchschnitt: 2 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 6270 Tagen | Erstellt: 21:00 am 1. Mai 2003
OC Newbie 15 Jahre dabei !
AMD Thunderbird B 1400 MHz
is your mainboard able to run @ 133mhz fsb?
No, its only a 100mhz, so I assume it will be 14*100 when I install it.
So i still need to know how to increase the multiplier by changing the bridges on the cpu itself. I will be installing it in 3 days(waiting on heatsink) so I need to know by then! Otherwise i will just overclock the fsb.
thing is about that wpcredit program, it is possible to change motherboard settings like agp mode speed and ram settings. Thats why I think it may be possible to change the multiplier through the program as there is a bit of it that looks like a multiplier part( has different numbers, currently at 7(which is what i have))
#edit: i just closed the quote tag
(Geändert von svenska um 18:27 am Mai 30, 2003)
Beiträge gesamt: 4 | Durchschnitt: 0 Postings pro Tag Registrierung: April 2003 | Dabei seit: 5556 Tagen | Erstellt: 20:38 am 4. Mai 2003
Unser PC Forum verwendet Cookies für einen optimalen Service. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass wir Cookies verwenden und personenbezogene Daten wie die IP-Adresse speichern (siehe Datenschutz Seite).X