» Willkommen auf AMD Overclocking «

osl
offline


OC Newbie
19 Jahre dabei !


Underclocking: Is it possible to lower default Vcore 1,58V to 1,35V (true XP-M 2400+ 35W Vcore) using some simple mod (for the KA7500C SMPS controller) for KM400 motherboards, like PCCHIPS M851LU, Matsonic MS8188E, Shuttle MK40VN ?

Reason ? I think the picture explains it all !

Regards,
Ole Steen Larsen
Denmark


Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 21:54 am 13. Juli 2004
CMOS
aus senminister
offline



OC God
20 Jahre dabei !

Other CPU-Type


first off .. what cpu do you have ?
and yes there is a simple mod, called pinmod ... you´ll find it here

just put some wire in the socketholes needed!


Sys: C64; CPUtyp: 6510/8 bit; OS: BASIC 4.0; RAM: 64KB; Floppy Disk, max. 170 KB, 40 Bildschirmzeichen je Zeile, 25 Bildschirmzeilen; 64000 Grafikpunkte; 16 Farbtöne; programmierbare Töne; ASCII; Funktionstasten; Schnittstellen: seriell, parallel;  Preis: ca. 680 Mark

Beiträge gesamt: 2012 | Durchschnitt: 0 Postings pro Tag
Registrierung: Nov. 2003 | Dabei seit: 7444 Tagen | Erstellt: 11:18 am 14. Juli 2004
KakYo
aus FFM & Ingolstadt
offline


OC God
22 Jahre dabei !

AMD Phenom II
2900 MHz @ 2900 MHz
45°C mit 1.1 Volt


Ähmm yes, it´s possible, but you´ll need a goog CPU, i don´t think that a normal XP2400+ for example an AIUHB will make the 2000MHz@1,35V...

You´ll need a good CPU like a very good JIUHB dlt or better a Mobile CPU like XP-M2600+

Another way could be to lower the Speed of the CPU...f.e. 1,5GHz@1,35V should be possible with an 2400+.


edit: I don´t think that you have to mod your Board, a simple Pinmod should be enough.

edit2: A "reverse-Vcore-Mod" on the board should be hard to realize, because if you use a "Widerstand" (I dont know how to translate) the Board thinks the Vcore is too low and it gives more "Spannung" (Power:)) A higher "Widerstand" brings a higher Vcore but I don´t think that it is possible to mod the board that way, that it brings a lower Vcore

Oh my god, Two years out of school and such a bad english:lol:






(Geändert von KakYo um 11:41 am Juli 14, 2004)

Beiträge gesamt: 8161 | Durchschnitt: 1 Postings pro Tag
Registrierung: Okt. 2001 | Dabei seit: 8206 Tagen | Erstellt: 11:30 am 14. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


I have a XP-M 2400+ Barton 35w and it is running with the MOBO, but it gets pretty hot with the Vcore 1,58V that the bios defaults to.

I was thinking about wiring a large resistor between KA7500C Pin 1 and Pin 12, but I am not sure that it works.

Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 11:50 am 14. Juli 2004
KakYo
aus FFM & Ingolstadt
offline


OC God
22 Jahre dabei !

AMD Phenom II
2900 MHz @ 2900 MHz
45°C mit 1.1 Volt


Ah:lol:
Now I understand...

On my nforce2 the XP-M 2400+ 45W is also detected with 1,575V Vcore.

I dont know if it works how you described but I would test if it is possible to use the PinMod (On the left---Workshop---Pinmod) to set a Vcore of 1,35V or 1,325V:noidea:

Beiträge gesamt: 8161 | Durchschnitt: 1 Postings pro Tag
Registrierung: Okt. 2001 | Dabei seit: 8206 Tagen | Erstellt: 11:54 am 14. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


Could you include a picture of the pin mode required for conly hanging Vcore = 1,35V (all the other parameters and pins confuse me)

OSL

Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 15:11 am 14. Juli 2004
CMOS
aus senminister
offline



OC God
20 Jahre dabei !

Other CPU-Type



this is viewing the socket from above. do this pinmod for 1.35V


Sys: C64; CPUtyp: 6510/8 bit; OS: BASIC 4.0; RAM: 64KB; Floppy Disk, max. 170 KB, 40 Bildschirmzeichen je Zeile, 25 Bildschirmzeilen; 64000 Grafikpunkte; 16 Farbtöne; programmierbare Töne; ASCII; Funktionstasten; Schnittstellen: seriell, parallel;  Preis: ca. 680 Mark

Beiträge gesamt: 2012 | Durchschnitt: 0 Postings pro Tag
Registrierung: Nov. 2003 | Dabei seit: 7444 Tagen | Erstellt: 20:36 am 14. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


Thanks. Will try it if my current KA7500C mod fails.

OSL

Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 23:13 am 14. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


Maybe this is a stupid question, but where should I measure the resulting Vcore after the mod ? Does the Bios show the actual Vcore after the mod ?

OSL

Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 12:41 am 15. Juli 2004
KakYo
aus FFM & Ingolstadt
offline


OC God
22 Jahre dabei !

AMD Phenom II
2900 MHz @ 2900 MHz
45°C mit 1.1 Volt


If this mod really works (i don´t believe it:lol:) you have to use a Monitoring software oder something else...

Beiträge gesamt: 8161 | Durchschnitt: 1 Postings pro Tag
Registrierung: Okt. 2001 | Dabei seit: 8206 Tagen | Erstellt: 13:01 am 15. Juli 2004