» Willkommen auf AMD Overclocking «

dergeert
aus owerglöcktensid
offline



OC God
20 Jahre dabei !

AMD Athlon 64 X2 Dual Core
1900 MHz @ 2280 MHz
45°C mit 1.125 Volt


attention, guys....

there is no pinmod to lower the voltage, and ther never will be....

you always get combinations of the bridge-configuration on the cpu and the pinmod-config. so all you can do without cutting any bridges on the cpu is raisa da vcore ;)

first thing to do is cut all the bridges but one on the cpu to get 1,1v... then you can uncreas voltage by pinmod, not before i'm afraid :(

Beiträge gesamt: 4710 | Durchschnitt: 1 Postings pro Tag
Registrierung: Sep. 2003 | Dabei seit: 7491 Tagen | Erstellt: 15:16 am 15. Juli 2004
CMOS
aus senminister
offline



OC God
20 Jahre dabei !

Other CPU-Type


do the pinmod i showed and cut all L11 bridges on the cpu and it should work!

@dergeert .. er hat nen mobile mit 1.35V default spannung, also sollte es gehen


Sys: C64; CPUtyp: 6510/8 bit; OS: BASIC 4.0; RAM: 64KB; Floppy Disk, max. 170 KB, 40 Bildschirmzeichen je Zeile, 25 Bildschirmzeilen; 64000 Grafikpunkte; 16 Farbtöne; programmierbare Töne; ASCII; Funktionstasten; Schnittstellen: seriell, parallel;  Preis: ca. 680 Mark

Beiträge gesamt: 2012 | Durchschnitt: 0 Postings pro Tag
Registrierung: Nov. 2003 | Dabei seit: 7444 Tagen | Erstellt: 18:16 am 15. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


The KA7500C undervolting mod works perfectly. One (5 cents) 270K resistor betwen pin 1 and pin 12 and Vcore is down 0.3 V and temps down 7 degrees (and everything is stable). Tests show that there is a nice linear correspondance between Vcore and the resistor value: Vcore = 1 + (R/1Mohm) V

Underclocking (or undervolting) made easy.

OSL




Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 14:39 am 17. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !



Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 0:19 am 24. Juli 2004
nubbi
offline



OC God
20 Jahre dabei !


congratz :)

Beiträge gesamt: 2820 | Durchschnitt: 0 Postings pro Tag
Registrierung: Mai 2003 | Dabei seit: 7635 Tagen | Erstellt: 11:30 am 24. Juli 2004
BDKMPSS
offline


OC God
22 Jahre dabei !


:noidea: wie hat er das gemacht? (ich meine jetzt nicht wirklich, aber Warum setzt das borard die V-Core runter???)

Beiträge gesamt: 1860 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8077 Tagen | Erstellt: 4:58 am 25. Juli 2004
osl
offline


OC Newbie
19 Jahre dabei !


I do not fully understand it myself, but it has to do with slightly increasing (or decreasing for overvolting) the current (I) to input Pin 1 and the KA7500C will compensate and ultimately lower (or rise) the output voltage.

Increasing the current (and lowering the output voltage) is achieved by letting a little more current come through resistor connected to plus (+). Decreasing the current (and rising the output voltage) is achieved by bleeding of a little current through a resistor to minus (-).

Overvolting this way has already been proven (Kevin Cribbs ref.), but reversing this and undervolting this way was my own idea.

I have included the internals of the KA7500C (maybe somebody can explain better how this works).



OSL

Beiträge gesamt: 15 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2004 | Dabei seit: 7198 Tagen | Erstellt: 21:57 am 25. Juli 2004
BDKMPSS
offline


OC God
22 Jahre dabei !


OK, now I now how it works

Beiträge gesamt: 1860 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8077 Tagen | Erstellt: 4:32 am 26. Juli 2004