I just got 1800+ T-bred CPU. Do I have to unlock?

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- I just got 1800+ T-bred CPU. Do I have to unlock?
https://www.forum-inside.de/topic.cgi?forum=14&topic=37

Ein Ausdruck des Beitrags mit 22 Antworten ergibt bei 3 Antworten pro Seite ca. 8 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 39.92 Gramm Papier.


-- Veröffentlicht durch darkcrawler am 11:39 am 10. Dez. 2002

nice:thumb:

i hope that my xp1700 tred aiuga will arive before this weekend:godlike:

(Geändert von darkcrawler um 11:40 am Dez. 10, 2002)


-- Veröffentlicht durch KS am 10:51 am 10. Dez. 2002

1800+@2004, +1,90V, CPU Temp 25 graden, M/B temp 9 graden, water cooled


-- Veröffentlicht durch KS am 21:10 am 6. Dez. 2002

Edit:
I can use OVERVOLT jumper pn A7V8X to add +0,2V now. It does not appear in the voltage selection in the BIOS screen. It only shows the result in the hardware monitor BIOS screen. Currently I run 1800+ T-bred A at 1,70V to get about 1873MHz. I am a bit afraid to go beyond 1,8V (P4 Sudden Death Syndrome).
But I did try +1,9V but the PC won't boot. In the BIOS Hardware monitor screen, it shows 1,90V in RED!


-- Veröffentlicht durch darkcrawler am 19:59 am 26. Nov. 2002

i meant at the first time ;)


at the second, u were a few secounds faster ;)


-- Veröffentlicht durch NWD am 19:53 am 26. Nov. 2002


Zitat von NWD am 19:34 am Nov. 26, 2002


MSI has the same "problem" ( i only heard about it ) you can only set a voltage about +0,2 over default but i cant test it

my cpu has a default of 1,70 or so and i have painted the L11 ..



*no comment*


-- Veröffentlicht durch darkcrawler am 19:46 am 26. Nov. 2002

u sad, the he should to paint the max 1,85v ;)


-- Veröffentlicht durch NWD am 19:35 am 26. Nov. 2002

and again u are just repeating what i have said


-- Veröffentlicht durch darkcrawler am 19:34 am 26. Nov. 2002

your mainboard can add +0,2v only, there are differences between the boards/manufacturers, so if u paint 1,7 u`ll be able to increase up to 1,85


Zitat von NWD am 18:54 am Nov. 26, 2002
i said



thats another thing;)


-- Veröffentlicht durch NWD am 19:34 am 26. Nov. 2002

i think thats the point ..

MSI has the same "problem" ( i only heard about it ) you can only set a voltage about +0,2 over default but i cant test it

my cpu has a default of 1,70 or so and i have painted the L11 ..

aber wieso kannst du kein deutsch wenn du in Holland lebst ?

i live in aachen ( " dreiländereck Deutschland Holland Belgien )


-- Veröffentlicht durch KS am 19:18 am 26. Nov. 2002

Yes, NWD, I live in Nederland (Den Haag). I bought this CPU from www.gistron.com last week for Euro 79,61

For my case, this CPU is strange that it does not respond to the increase in Vcc. Or is it not high enough (1.7V about +0.2V from default)?


-- Veröffentlicht durch NWD am 18:54 am 26. Nov. 2002

i said


-- Veröffentlicht durch darkcrawler am 17:38 am 26. Nov. 2002

u have to "paint" the vcc higher on the cpu, e.g. 1,7v and then u`ll be able to select higher voltages

(Geändert von darkcrawler um 17:38 am Nov. 26, 2002)


-- Veröffentlicht durch NWD am 17:15 am 26. Nov. 2002

hmm strange .. i dont know the T-Bred steppings ..

maybe it is just a bad one and thats the limit

you said it is watercooled ? try the painting guide and the full of 1,85 Volts ..

and by the way: Garantieziegel - is it dutch or something like that ?


-- Veröffentlicht durch KS am 17:07 am 26. Nov. 2002

Points to note on A7V8X and AMD 1800+ T-bred A:
1. A7V8X Bios have only +1.5V to +1.7V to select
2. Overvolt jumper has no effect on Vcc at all
3. CPU does not repond to the increase in Vcc. I give it 1.7V still can't go any faster than 1.5V.

Any comment, please?


-- Veröffentlicht durch NWD am 17:06 am 26. Nov. 2002

but i think u can increase the VCore up to 1,85 so where is the problem ?


-- Veröffentlicht durch KS am 16:58 am 26. Nov. 2002

But at least, I got a virtual XP2200+ at 1.5V default on A7V8X. NOT BAD BUT NOT SATISFIED. My last 1600+ AGOIA-Y could go upto 1997 MHz before it's dead for no reason.


-- Veröffentlicht durch KS am 16:56 am 26. Nov. 2002



Thank you. It works without unlocking. But this is the max that I could get right now at +1.5V default on A7V8X.


-- Veröffentlicht durch NWD am 13:18 am 26. Nov. 2002

mmh the painting guide is a little bit irritating ..

if you set a 11,5 x 133 you get the same layout as in the picture

but if you set "Unlock" its only shown the last Bridge connected :confused:

but u can try it .. just select another multi and see if it works ..


-- Veröffentlicht durch darkcrawler am 11:19 am 26. Nov. 2002

its already unlocked, so you should be able to select multipliers up to 12,5


-- Veröffentlicht durch KS am 10:55 am 26. Nov. 2002


Again and again.


-- Veröffentlicht durch KS am 10:54 am 26. Nov. 2002

sorry. try attaching the picture again.


-- Veröffentlicht durch KS am 10:51 am 26. Nov. 2002


OCinside.de PC Forum
© 2001 - 2021 www.ocinside.de