Question about USB infrared receiver to PC

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Question about USB infrared receiver to PC
https://www.forum-inside.de/topic.cgi?forum=14&topic=163

Ein Ausdruck des Beitrags mit 6 Antworten ergibt bei 3 Antworten pro Seite ca. 2 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 9.98 Gramm Papier.


-- Veröffentlicht durch ocinside am 13:22 am 6. Juni 2006

This isn't an USB device, so you can't connect this non-USB device to an USB Port (OK, you can, but it won't work !).


-- Veröffentlicht durch metro99 am 12:53 am 6. Juni 2006

mybe i didnt clear myself,
the usb cable does not belong to the Infrared, I took it from other device.. and the infrared was belong to the satellite Tv..

you can see here more pictures mybe can help.
The infrared deavice is like this one in the picture:
-here-
its called "TV Link"
this image of the infrared without plastics..


-- Veröffentlicht durch ocinside am 18:53 am 5. Juni 2006

Why should your receiver "burn" ???
(if it's a receiver and no IrDA device)
If you've cutted the cable (why ever) and solder it back again, it should work.
It's not possible to give you more support with these pictures and without any informations what happened to this receiver, etc.


-- Veröffentlicht durch metro99 am 18:46 am 5. Juni 2006

ok, thanks.  but the question is, when ill connect each color of Infrared to the usb cable, and connect the USB to my computer, the Infrared will be burn ??


-- Veröffentlicht durch ocinside am 15:16 am 4. Juni 2006

Your USB cable should have the same colors.
black = GND, white (or yellow) = data (-), green (or blue) = data (+), red = VCC + 5 volt
But there's no special color code for an infrared diode.


-- Veröffentlicht durch metro99 am 19:43 am 2. Juni 2006

[I hope its the correct forum for that question]
Hello, I'v read the article about the Question about USB infrared receiver to PC and I want to do it, but I dont need to make the reciver cuz i already have one. I would like to know how to connect it to the usb cable i have.

the reciver got 3 wires: red,blue,green.
the usb cable got 4:black,white,red,green.

I put photos so u can understand it better:

the Infra-Red receiver
The Infra-Red wires
The USB cable wires

Thanks alot.


OCinside.de PC Forum
© 2001 - 2021 www.ocinside.de