-- Veröffentlicht durch Bliemsr am 12:44 am 18. Okt. 2005
My days with an Athlon XP Palo are well over now, but let me
ask, nonetheless: is the improvement worth the effort?
What does your temperature sensor say now, after the mod?
Just curious.
-- Veröffentlicht durch Traz am 23:08 am 27. Juli 2005
Thanks :thumb: Its clear
-- Veröffentlicht durch Beomaster am 22:16 am 27. Juli 2005
You can use Pinmod only for raising the VCore, or Change it to whatever you want if the L11 bridges are cut
-- Veröffentlicht durch Traz am 21:48 am 27. Juli 2005
I see, so i should do just this:
thanks for showing me the way
But shouldnt work the other method?
-- Veröffentlicht durch Beomaster am 20:20 am 27. Juli 2005
no, you don't have to cut all L11 Bridges
look at the Athlon XP paint guide what brides are neccessary for 1,75V
this will be your actual configuration
now look wich bridge you have to cut to reach 1,7 or 1,65V
to reach 1,675V I belive you have to paint additionally a bridge, but I'm not sure
-- Veröffentlicht durch Traz am 17:41 am 27. Juli 2005
I have an AhtlonXP Palomino 1900+ running at default settings (12x 133 = 1600 MHz).
The problem is that my mobo (A7N8X-E) overvolts the CPU and it too hot. It is at 1.79v, it should be at 1.75v, and I know it runs well at 1.70v.
I have seen the pin-mod guide, is this what I should do?
Do I have to cut all L11 bridges?