barton 2500+ locked@3200+?

- OCinside.de PC Forum
https://www.ocinside.de

-- AMD Overclocking
https://www.forum-inside.de/forums.cgi?forum=1

--- barton 2500+ locked@3200+?
https://www.forum-inside.de/topic.cgi?forum=1&topic=11529

-- Veröffentlicht durch Beomaster am 16:46 am 11. Juni 2005

it could work, if your Board supports FSB 200 just give it a try
with my old Barton I was able to lower the Voltage to 1,5V by increasing the speed from 11x166 to 11x200
but such good Bartons are seldom, just try out, an if it doesn't work raise the VCore so long your CPU Temp won't raise above 55°C

-- Veröffentlicht durch profigimp am 15:00 am 11. Juni 2005

Increasing the FSB by 34 will definitely lead to instabilities :dontknow:
if you don't give more v-core....

If you're fortunate your cpu will work with 200x 11 with a low v-core of 1,7- 1,75 V :thumb:  

-- Veröffentlicht durch HomerIII am 14:04 am 11. Juni 2005

you can try it but i don´t think that it will work.
if oyu ll give 1,75v and more it will work fro sure;)

-- Veröffentlicht durch PiGi am 14:01 am 11. Juni 2005

hi people... i want to know if a barton 2500+(166x11) locked, could became a 3200+ just increasing the fsb (200x11)...
and if it will be possible without increasing the voltage...

thanks