2400+ unlocked....?!?!

- OCinside.de PC Forum
https://www.ocinside.de

-- AMD Overclocking
https://www.forum-inside.de/forums.cgi?forum=1

--- 2400+ unlocked....?!?!
https://www.forum-inside.de/topic.cgi?forum=1&topic=11288

-- Veröffentlicht durch profigimp am 19:52 am 15. April 2005

These problems mainly are connected to nForce2 boards.;)

But you have a via chip. So don't be hesitant to do the mobile mod:thumb:

-- Veröffentlicht durch fremder am 17:05 am 15. April 2005

Look here:
Mobile Mod
You only need to connect the blue "line" to have a Mobile.
But I read some Boards or CPUs made problems after the Mobile Mod.

Sry for my bad English ^^

(Geändert von fremder um 17:06 am April 15, 2005)

-- Veröffentlicht durch profigimp am 15:05 am 15. April 2005

You have to read this page in order to know how to cut/close the bridges on yourCPU;)

But I'm not quite sure what bridges you exactly have to close. I think all L5 bridges.

But don't do anything, as long as you don't know what to do

I think somebody else knows what bridges you have to close;)

(Geändert von profigimp um 15:11 am April 15, 2005)

-- Veröffentlicht durch PiGi am 15:00 am 15. April 2005

and how can i do to make the mobile mod? there are some guides on this site?

thanks

-- Veröffentlicht durch profigimp am 14:55 am 15. April 2005

Your CPU definitely is locked. The 0403 points on the year and the week it was made in. 3rd week in 2004.

The only thing you can do in order to overclock your Cpu is doing a mobile mod.

-- Veröffentlicht durch PiGi am 14:39 am 15. April 2005

ok, on my cpu is written:
AXDA2400DKV3C
AIXJB0403WPMW

i hope you could help me to find some informations about my cpu

thanks

-- Veröffentlicht durch profigimp am 14:09 am 15. April 2005

the pinmod on this site sets one specific multi, which you can't change except by another pinmod:thumb:

Doing the mobile mod(you can get instructions for this on this site too)
will give you the possibility to change the multi on the fly in windows.

But I got the impression that you didn't really know if your CPU is unlocked or not. You can find out by posting the text, that is written on the CPU;)

-- Veröffentlicht durch PiGi am 13:04 am 15. April 2005

ok, but if i try to unlock the multiplier and to set a specific value for the multi (es x10) through the pin guide of this site, can i have an unlocked cpu?. so can it run stable at 10 x 200?

thanks

-- Veröffentlicht durch cuhlatee am 23:47 am 14. April 2005

When it's not possible to unlock the Multi, you can try the mobile Mod, to get a mobile CPU, if it works you can change the multi via Software in you operating system!!!

-- Veröffentlicht durch PiGi am 22:42 am 14. April 2005

i have this system:
mainboard: asus a7v880 (via kt 880)
Ram: 256 mb x2 pc 3200 cas latency 3
graphic card: asus v9950 ge (ge force fx 5900)
hard disk: maxtor 80 gb ata 133

now, how can i do to know if my cpu is unlockable?, and if it shoud be unlockable there is some other way to unlock the multiplier?

thanks

-- Veröffentlicht durch Beomaster am 20:10 am 14. April 2005

there is another possibility
newer CPUs are not unlockable
if you want to find that out just test an multiplier thats lower than the actual multi your CPU is runin with
just try if 14 or lower will work
if your multi is still 15 you have an not unlockeable CPU

(Geändert von Beomaster um 20:10 am April 14, 2005)

-- Veröffentlicht durch profigimp am 19:28 am 14. April 2005

Hello an welcome in the ocinside forum:ocinside:

I think your problem, as you explained it, is, that the voltage (vcore) you give to your cpu is less than it needs.

So if the temperatures are low, you can try to give more Vcore. possibly after that it'll run stable.

But it would be better for us to know the other components of your system, ram, mainboard, to help you in the best way we could.

(sorry if my english is not the best, I hope you can understand);)

(Geändert von profigimp um 19:41 am April 14, 2005)

-- Veröffentlicht durch PiGi am 19:20 am 14. April 2005

hi, i tried to unlock my amd athlon xp 2400+ thoroghbred-B, with the "Interactive Pin-Mod guide v1.2 for AMD Athlon XP, T-Bred and Barton CPUs" of this site, (modifying directly on cpu)
and i chose just to unlock the multiplier up to 12,5 through multi via BIOS...
when i go to open my pc it run ok at default but when i try to modify the multiplier it doesn't start...
why? can you give me some explanation please?

bye thanks