Username:   Not registered yet?
Password:   Forgot password?
iB Code Einmal klicken um den Tag zu öffnen, nochmal klicken zum Close

Top Smilies
Beitrag

HTML ist on für dieses Forum

IkonCode ist on für dieses Forum

SMILIES LEGENDE ansehen

Beitragsoptionen Would you like to add your signature?
Do you want to be informed about answer by email?
Do you want to activate emoticons in your post?
 

Review of postings for Voltage increase software for Dell DimensionE521 (the latest posts first)
rage82 Erstellt: 16:44 am 13. März 2012
dell locks the clock generators for years now, i don't think that your chnce is that big.

you can try setfsb but you have to know what pll is on your board.
in the last 5 dell i tried to overclock, they always used a pll from vendor ICS
Manka Erstellt: 9:16 am 13. März 2012
I have a Dell 5150 with a Pentium 4 3.4ghz processor (Intel 945G Express motherboard).
Do you have a software to overclock it beyond 3.4ghz?
ocinside Erstellt: 5:31 am 16. Dez. 2010
And if it's limited by the voltage regulators, you should try to optimize the cooling (... of course you should always optimize it, particularly when you're increasing the voltages).
On the other hand, the maximum voltage could be also limited by the power supply, did you already test it with another PSU?
rage82 Erstellt: 10:49 am 13. Dez. 2010
as an additition, tools like rmclock are working with the VID of the cpu. so the maximum is given by the cpu.

for example an intel core2 e6600 with VID of 1,3225v limits the tool to this voltage. normally the maximum VID is the normal vcore, so you are right to say, these tools are only for lowering vcore.

probably, this is not a problem of your mainboard, like spraadhans said, the 6400+ runs by default near the k8 limits.

so, most likely, the problem is the whole combo. a dell mainboard (and maybe a narrowed power supply) plus the 6400+.
Toine3 Erstellt: 20:48 am 12. Dez. 2010
Sorry for the late reply, but right now it seems that the Dell dimension E521 mobo is limited in Watt, so increasing a few watts will give you directly a crash in CPU stress testing. Higher Voltage and higher FSB will bring here nothing.
I did even try to find the optimum in lowering the multiplier & increasing the FSB and with lowering the voltage I was trying to keep the Watt below max limit, but still then only a few extra Ghz profit, before crashing.  
For testing I have used Orthos and OCCT.  No way to do a decent OC on this Dell.



(Geändert von Toine3 um 20:49 am Dez. 12, 2010)
Weniger Answer Mehr Answer
ocinside Erstellt: 15:41 am 6. Okt. 2009
Yes, this Socket AM2 pinmod guide pinmod should work fine with your processor.
Dell overclocking seem to be very interesting for several users, so Toine3 did you already get higher overclocking results of your Dell Dimension E521?
Blackout Erstellt: 17:00 am 15. Sep. 2009
one opportunity is to go to the workshop.
"pinmod anleitung"
there you can increase the voltage up to 1,55v
with one wire

try this first
t4ker Erstellt: 0:49 am 15. Juli 2009
Just try it with the stock vcore.  You have to change the ref. clock generator....set it for e.g. to 220 and you will see if it works. A good tool for testing the stability is Sp2004 (Prime 95).

Regards

t4ker
spraadhans Erstellt: 16:35 am 21. Mai 2009
You're probably right, 1,45v might be the limit of the dell mainboard.

How far goes the CPU for now?
Toine3 Erstellt: 21:51 am 19. Mai 2009
No I'm using clockgen and CBI. RMclock is only for lowering the voltage not for increasing as I can remember.
Did downloaded CrystalCPUID, just like in CBI I can not go higher that 1.45Volt, so it appears to me that somewhere the Dell mobo does limited the core voltage to max. 1.45V.  

 
BTW: strange that the moderator changes this topic to English forum, because I can NOT WRITE GERMAN, BUT I CAN READ GERMAN VERY WELL, so replies in German are always welcome.  

(Geändert von Toine3 um 21:53 am Mai 19, 2009)


(Geändert von Toine3 um 22:30 am Mai 19, 2009)
×