Benutzername:   Noch nicht registriert?
Passwort:   Passwort vergessen?
iB Code Einmal klicken um den Tag zu öffnen, nochmal klicken zum Schliessen

Top Smilies
Beitrag

HTML ist on für dieses Forum

IkonCode ist on für dieses Forum

SMILIES LEGENDE ansehen

Beitragsoptionen Möchten Sie Ihre Signatur hinzufügen?
Wollen Sie per Email über Antworten informiert werden?
Wollen Sie Emoticons in Ihrem Beitrag aktivieren?
 

Beitragsrückblick für Wie Übertakte ich jetzt wirklich ??? (die neuesten Beiträge zuerst)
fire113 Erstellt: 18:03 am 9. Juni 2003
hat er halt übersehn
aber hast gut definiert
eQuiLizeR Erstellt: 17:43 am 9. Juni 2003
willst du mich stressen? :angry: lies meinen megalangen post da ... :hell::hell::hell:
fire113 Erstellt: 16:21 am 9. Juni 2003
CheepoBios 1.12 beta for K7S5A
Based on ECS 021129 beta

chb1129.rom lan / non-lan Version
chb1129f.rom lan / non-lan Version with fastwrites enabled

Release notes:


- Adjust timing for stability and compatibility
- Onboard lan Auto Detection newly introduced by ECS doesn't seem to work properly and may prevent non-lan boards from working. I have fixed that by disabling onboard lan by default. Just enable it if needed
- Fixed Athlon XP1700+ was detected as 1800+
- ECS support sent the 021129 beta bios to a user as a solution to the "lost cmos" problem. My board doesn't have this problem so you try and tell me!!!!

- FSB modes reprogrammed:

"100/100 MHz" changed from 99.6 to 100.9 MHz
"133/133 MHz" changed from 132.77 to 133.9 MHz
"100/133 MHz" changed from 99.6/132.77 to 100.9/133.9
No more underclocking by default!

- Several FSB modes added. New list of available modes:

100/100 MHz
100/133 MHz
133/133 MHz -> Default modes

H/W Trap (hardware default)
112/112 MHz
124/124 MHz
138/138 MHz (reprogrammed from 137.3 to 138.0)
150/150 MHz
166/166 MHz -> Already present in the "OC" bios

110/110 MHz
133/100 MHz (Now 133.9/100.9)
143/143 MHz
147/147 MHz
110/147 MHz
133/166 MHz
200/200 MHz

Please note that the "166 MHz no-boot issue" hasn't been dealt with
in this bios modification. It seems that bios timings need to be adjusted to allow
booting at such speed. This issue could also affect the 200/200 settings.

- Extra memory settings:
- RAS Precharge Time=2T
- RAS Active Time=4T, 5T

- Full screen logo can be enabled/disabled via bios menu

- A few hidden bios options have been enabled with amibcp. Please notice that none of these settings have been fixed or reprogrammed at all.

- PCI Latency Timer
- PCI slot #1 to #4 IRQ priority
- IO APIC
Note: there is no need to enable PCI IDE Busmaster anymore, it was already present as an available option in the ecs bios

The default values for these settings, as well as all other settings except onboard lan, remain the same as in the original bios.



I wish to thank Jinxter, tw.p, Bench400 and Beheerder: deblokker mij, fellow bios modders
at www.ocworkbench.com/ecs for their useful ideas, discussion and testing

und dann noch die OC´ler
HIER
CheepoBios 1.12 beta for K7S5A
Based on ECS 021129 beta

chb1129.rom lan / non-lan Version
chb1129f.rom lan / non-lan Version with fastwrites enabled

Release notes:


- Adjust timing for stability and compatibility
- Onboard lan Auto Detection newly introduced by ECS doesn't seem to work properly and may prevent non-lan boards from working. I have fixed that by disabling onboard lan by default. Just enable it if needed
- Fixed Athlon XP1700+ was detected as 1800+
- ECS support sent the 021129 beta bios to a user as a solution to the "lost cmos" problem. My board doesn't have this problem so you try and tell me!!!!

- FSB modes reprogrammed:

"100/100 MHz" changed from 99.6 to 100.9 MHz
"133/133 MHz" changed from 132.77 to 133.9 MHz
"100/133 MHz" changed from 99.6/132.77 to 100.9/133.9
No more underclocking by default!

- Several FSB modes added. New list of available modes:

100/100 MHz
100/133 MHz
133/133 MHz -> Default modes

H/W Trap (hardware default)
112/112 MHz
124/124 MHz
138/138 MHz (reprogrammed from 137.3 to 138.0)
150/150 MHz
166/166 MHz -> Already present in the "OC" bios

110/110 MHz
133/100 MHz (Now 133.9/100.9)
143/143 MHz
147/147 MHz
110/147 MHz
133/166 MHz
200/200 MHz

Please note that the "166 MHz no-boot issue" hasn't been dealt with
in this bios modification. It seems that bios timings need to be adjusted to allow
booting at such speed. This issue could also affect the 200/200 settings.

- Extra memory settings:
- RAS Precharge Time=2T
- RAS Active Time=4T, 5T

- Full screen logo can be enabled/disabled via bios menu

- A few hidden bios options have been enabled with amibcp. Please notice that none of these settings have been fixed or reprogrammed at all.

- PCI Latency Timer
- PCI slot #1 to #4 IRQ priority
- IO APIC
Note: there is no need to enable PCI IDE Busmaster anymore, it was already present as an available option in the ecs bios

The default values for these settings, as well as all other settings except onboard lan, remain the same as in the original bios.

cu





(Geändert von fire113 um 16:23 am Juni 9, 2003)
robin Erstellt: 16:11 am 9. Juni 2003
Also:
1. Wenn ich jetzt geflasht habe (welches bios soll ich nehem?)
Was und wo muss ich dann nder, damit meine Mhz steigern ???
fire113 Erstellt: 16:02 am 9. Juni 2003
ich hatte einfach nach dem board+modbios unter google gesuch!

mach auchmal.

hatte glaub ich etliche gefunden( 3-5 oder so).
Weniger Antworten Mehr Antworten
robin Erstellt: 15:36 am 9. Juni 2003
Also ich habe a ien porblem :
Wenn ich mein Diskettenlaufwerk angeschlossen habe, und dann von ner diskette booten will, dann geht das nicht !!!
Auch in XP liest er keine disketten aber das Laufwerk mist nicht kaputt !!!
Habe es beim freund ausprobiert.

2. Welcher multiplikator trifft den bei mir zu ???

3.Habt ihr vielleicht ein Empfehlenswertes Bios indem ich den FSB änder kann ???
fire113 Erstellt: 15:29 am 9. Juni 2003
aber sollte funzen


cu
eQuiLizeR Erstellt: 15:22 am 9. Juni 2003
naja ... ok ... so direkt steht's nit da ...

der cpu-takt entsteht durch die kombination aus FSB (Front-Side-Bus) und Multiplikator..

hast du zB wie ich einen FSB von ca. 217MHz und einen Multi von 10, dann ergeben sich daraus ~ 2170 MHz, denn das produkt dieser beider faktoren ergibt den CPU-Clock.
in diesem falle also 217*10=2170.

So also ergibt sich die Taktrate, mit der dein Prozessor arbeitet.
Das Anheben des FSBs bringt aber generell mehr leistung als eine multierhöhung, der dabei auch der Speicher übertaktet wird.
andererseits bringt dies auf boards, die keinen nforce chipsatz haben einen nachteil mit sich: alle anderen buses usw deines PCs werden ebenfalls übertaktet, d.h. AGP-bus, PCI-bus, IDE .... dadurch werden dann also logischerweise auch alle steckkarten, wie zB eine zusätzliche soundkarte oder netzwerkkarte oder grafikkarte mit übertaktet.
dadurch kann es dann wiederrum zu abstürzen kommen oder im ernstfall sogar zu beschädigungen..

ab einem bestimmten FSB-takt setzen dann sog. teiler ein, welche bewirken, dass zB der PCI takt nicht bis ins unermessliche steigt, sondern irgendwann auch wieder auf die normalen 33,3 MHz getaktet wird ... somit drüfte es also schwer bleiben, PCI-karten zu zerstören, weil fast alle boards PCI Takteraten von max. 37-38 MHz zulassen. genauso funktioniert das auch mit dem agp-bus usw..

soo ... und da ich jetzt unendlich lange weiterschreiben könnte, was du alles beachten und verändern musst und ich jetzt keinen bock mehr auf tippen habe, geh erstmal ausprobieren....

so ... ich übernehme für all dies keinerlei gewähr oder ähnliches ...

viel spaß :tongue:
fire113 Erstellt: 15:15 am 9. Juni 2003
moin

hab auch noch son teil mit meiner alten cpu bestückt.
nit nem oc bios sollte es aber laufen , mit nem t-bread natürlich.

deine cpu schau mal in den workshop zu deiner linken.

cu
DTC Erstellt: 15:14 am 9. Juni 2003
Auf  dem Link gibts es oben einen Punkt "Overclocking" den anklicken und lesen, dann noch ein paar allgemeine Threads zum Thema Overclocking oder Übertakten durchlesen und alles wird gut, und das wichtigste Geduld !
Der immer wieder unterschätzte Suchbutton, der nicht nur hier, sondern auch auf anderen Seiten wie z.B. Google.de angeboten wird,
kann auch sehr sehr SEHR nützlich sein.

DTC
×